Machines
Machines covered
Every model has its own catalog with part numbers, application and condition.
Wheel Loader
14 models
WA380-6
- Net power
- 142 kW / 191 HP @ 2,100 rpm
- Operating weight
- 16,540 – 17,510 kg (36,460 – 38,610 lb)
The workhorse 18-tonne loader. Hydraulically actuated wet disc brakes on all four wheels and a single-reduction planetary final drive.
WA380-7
- Net power
- 142 kW / 191 HP @ 2,100 rpm
- Operating weight
- 18,070 – 18,650 kg (39,840 – 41,115 lb)
Tier 4 Interim re-power of the WA380 platform, adding lock-up clutch and a 10 percent fuel improvement over the -6.
WA380-8
- Net power
- 143 kW / 192 HP @ 2,100 rpm
- Operating weight
- 18,385 – 19,020 kg (40,532 – 41,932 lb)
Current generation with a new Z-bar linkage, tighter turning radius and the highest breakout force in the 18-tonne class.
WA470-8
- Net power
- 216 kW / 290 HP @ 2,000 rpm
- Operating weight
- 24,500 – 26,800 kg (54,010 – 59,080 lb)
Quarry-class 27-tonne loader built around the SAA6D170 engine and a hydraulic steering system with variable displacement.
WA500-8
- Net power
- 216 kW / 290 HP @ 2,000 rpm
- Operating weight
- 29,500 – 31,500 kg (65,040 – 69,450 lb)
Thirty-tonne loader for aggregate plants and large ports, with lock-up torque converter and load-hold hydraulics.
950 GC
- Net power
- 162 kW / 217 HP @ 2,100 rpm
- Operating weight
- 17,000 – 19,500 kg (37,480 – 42,990 lb)
GC wheel loader built for aggregate and quarry work, with a durable driveline and the simplest controls in the class.
950M
- Net power
- 162 kW / 217 HP @ 2,100 rpm
- Operating weight
- 18,000 – 19,000 kg (39,680 – 41,890 lb)
Versatile M-series loader with a five-speed powershift transmission and an adaptive ride control system.
980M
- Net power
- 216 kW / 290 HP @ 2,100 rpm
- Operating weight
- 25,500 – 28,500 kg (56,220 – 62,830 lb)
Twenty-eight-tonne loader with load assist, an integrated rear camera and a Z-bar linkage with high curl force.
744K
- Net power
- 192 kW / 257 HP @ 2,100 rpm
- Operating weight
- 17,500 – 18,600 kg (38,580 – 41,010 lb)
Loader with a Z-bar linkage, rock guards and a sealed-and-lubricated driveline that holds torque in the teeth.
844K
- Net power
- 228 kW / 306 HP @ 2,100 rpm
- Operating weight
- 23,500 – 25,000 kg (51,810 – 55,110 lb)
Twenty-five-tonne loader with active ride control and a torque-intensive driveline built for aggregate duty.
L120H
- Net power
- 273 kW / 366 HP @ 1,800 rpm
- Operating weight
- 25,000 – 27,500 kg (55,110 – 60,630 lb)
Volvo loader with load-assist weighing, a locking torque converter and a fuel burn figure that leads its class.
L150H
- Net power
- 310 kW / 416 HP @ 1,800 rpm
- Operating weight
- 30,000 – 33,000 kg (66,140 – 72,750 lb)
Thirty-tonne loader built for long shifts, with a load-assist system and a reinforced Z-bar linkage.
ZW180-6
- Net power
- 164 kW / 220 HP @ 2,100 rpm
- Operating weight
- 17,600 – 18,900 kg (38,800 – 41,670 lb)
Wheel loader with a Z-bar linkage, a traction control system and the reliability Hitachi put into every ZW.
1150K
- Net power
- 192 kW / 257 HP @ 2,100 rpm
- Operating weight
- 17,600 – 18,700 kg (38,800 – 41,230 lb)
Loading a bucket in a single motion with the Case no-re-ride geometry and a ride control that keeps the load steady.
Excavator
10 models
PC210LC-11
- Net power
- 123 kW / 165 HP @ 2,000 rpm
- Operating weight
- 22,300 – 23,500 kg (49,180 – 51,810 lb)
Twenty-two-tonne excavator with the Komatsu Smart Hydraulics closed centre system and four selectable operating modes.
PC490LC-11
- Net power
- 268 kW / 359 HP @ 2,000 rpm
- Operating weight
- 48,000 – 49,500 kg (105,820 – 109,130 lb)
Forty-nine-tonne production excavator with a sealed-and-lubricated track design and reinforced boom and arm.
320 GC
- Net power
- 122 kW / 164 HP @ 2,000 rpm
- Operating weight
- 20,500 – 22,400 kg (45,190 – 49,380 lb)
Twenty-two-tonne excavator with Cat GC hydraulic system tuned for fuel economy and a narrow footprint.
336 GC
- Net power
- 233 kW / 312 HP @ 2,000 rpm
- Operating weight
- 32,000 – 34,000 kg (70,550 – 74,960 lb)
Thirty-three-tonne excavator with refined hydraulics for faster cycle times at a lower operating cost.
EC300E
- Net power
- 186 kW / 249 HP @ 1,900 rpm
- Operating weight
- 30,500 – 32,000 kg (67,240 – 70,550 lb)
Thirty-one-tonne excavator with a reinforced boom and a digging force tuned for mass excavation.
ZX350LC-6
- Net power
- 268 kW / 359 HP @ 1,900 rpm
- Operating weight
- 34,500 – 36,500 kg (76,060 – 80,470 lb)
Thirty-five-tonne excavator with a reinforced front frame, larger bucket and a refined swing circuit.
DX300LC-7
- Net power
- 204 kW / 274 HP @ 1,900 rpm
- Operating weight
- 30,300 – 31,300 kg (66,800 – 69,000 lb)
Thirty-tonne excavator with the 2P power management system and a floating undercarriage for rough ground.
SK350LC-8
- Net power
- 234 kW / 314 HP @ 1,900 rpm
- Operating weight
- 35,000 – 36,000 kg (77,160 – 79,360 lb)
Thirty-five-tonne excavator with a reinforced upper structure, COSINE control hydraulics and a 4.8 m arm.
SY215C
- Net power
- 145 kW / 194 HP @ 2,000 rpm
- Operating weight
- 21,500 – 22,500 kg (47,400 – 49,600 lb)
Twenty-two-tonne excavator with a symmetric design, high-flow hydraulics and a parts list cross-referenced to Japanese OEM.
TB260
- Net power
- 45 kW / 60 HP @ 2,000 rpm
- Operating weight
- 5,260 – 5,570 kg (11,600 – 12,280 lb)
Compact 2.6-tonne excavator with selectable excavator and backhoe configurations and high breakout for its size.
Bulldozer
2 models
D155AX-8
- Net power
- 216 kW / 290 HP @ 2,100 rpm
- Operating weight
- 34,500 – 38,200 kg (76,060 – 84,220 lb)
Thirty-eight-tonne dozer with a six-way PAT blade, electronic traction control and sealed track chains.
D6 LGP
- Net power
- 212 kW / 284 HP @ 2,200 rpm
- Operating weight
- 22,000 – 23,500 kg (48,500 – 51,810 lb)
Low ground pressure dozer with a slope-assist traction control package and the S3 safety system.
Articulated Dump Truck
1 models
Telehandler
1 models
Skid Steer
1 models
Backhoe
1 models
Motor Grader
1 models